Favorite multi-tool?
#1
Full Member
Thread Starter
Join Date: Mar 2016
Location: Lutz, FL
Posts: 416
Bikes: 2014 Fuji Traverse 1.3, 2020 Electra Cruiser 1, 1995 Giant CFM-4
Liked 51 Times
in
36 Posts
Favorite multi-tool?
What's everyone's favorite multi-tool to carry when riding? I've been eyeballing the Pedro's Micro-20 but don't think I need all the tools on it for my purposes. Plus I already have a separate set of Pedro's levers. Just looking for something that won't take up much space in my saddle bag but still give me the main tools I'd probably need for basic trail side repairs.
Thanks for any input.
Thanks for any input.
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 16,142
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,404 Times
in
3,729 Posts
None. I carry a small screw driver with a changeable point, a flat, philips and a couple torx points for it and a couple of allen keys.
Your favorite things to carry should be things you can work with. If that's a multi tool, I'm okay with that. I just never grew to like them. Not even the famous swiss army knife.
Your favorite things to carry should be things you can work with. If that's a multi tool, I'm okay with that. I just never grew to like them. Not even the famous swiss army knife.
Likes For Iride01:
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Likes: 0
Liked 1,102 Times
in
747 Posts
The Park MT-1 "dog bone" tool is my favorite. It's very small, light, inexpensive and has the essential tools: 3,4,5,6,8mm hex keys, 8,9,10mm box wrenches and a small screwdriver. The allen keys are arranged for good leverage which isn't always the case with multi-tools. It, a small chain tool and tire levers have covered all of my roadside needs.
#5
You've probably read this before (and you probably don't want to hear it if your mind is set on a multi-tool), but I have found that carrying the few individual tools I need works out much better than lugging around a heavy multi-tool with a bunch of components that don't work well and/or aren't needed for my bike. The chain tool component of most multi-tools is usually not very good and nor are the tire levers. For me, having all those Allen wrenches attached to a fat handle makes them really hard to maneuver in tight spaces on the bike.
I carry a small chain tool, small Phillips and flat screwdrivers, a tire lever, and just the (loose) Allen wrenches I need.
I carry a small chain tool, small Phillips and flat screwdrivers, a tire lever, and just the (loose) Allen wrenches I need.
Likes For Papa Tom:
#6
Full Member
Thread Starter
Join Date: Mar 2016
Location: Lutz, FL
Posts: 416
Bikes: 2014 Fuji Traverse 1.3, 2020 Electra Cruiser 1, 1995 Giant CFM-4
Liked 51 Times
in
36 Posts
Thanks for the replies everyone,
This is the advice I need...from experienced riders. My mind isn't set on a multi tool and I'd actually prefer separate tools but was worried about space. Hopefully I won't need either. I like the small multi-tip screwdriver idea along with my flat tools/kit. I guess I need to figure out the sizes for torx tips and allen wrenches I need. If I need any more serious repairs, I'm calling for a ride.
This is the advice I need...from experienced riders. My mind isn't set on a multi tool and I'd actually prefer separate tools but was worried about space. Hopefully I won't need either. I like the small multi-tip screwdriver idea along with my flat tools/kit. I guess I need to figure out the sizes for torx tips and allen wrenches I need. If I need any more serious repairs, I'm calling for a ride.
#7
Recreational Road Cyclist
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 569
Bikes: 1990 Peter Mooney road bike
Liked 260 Times
in
140 Posts
The Park MT-1 "dog bone" tool is my favorite. It's very small, light, inexpensive and has the essential tools: 3,4,5,6,8mm hex keys, 8,9,10mm box wrenches and a small screwdriver. The allen keys are arranged for good leverage which isn't always the case with multi-tools. It, a small chain tool and tire levers have covered all of my roadside needs.
#8
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,619
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,552 Times
in
3,049 Posts
Crank Brothers M10 is my daily carry and has long hex keys which are quite handy. The Spurcycle Tool is nice and a really solid tool to use but it is deficient in the fact it uses small bits. I haven't lost any yet but I could see someone loosing one in the heat of the moment.
Having a lot of tools is cool but I want the common tools to be easy to use. There are plenty of options for smaller chain tools and such should I need one and I can find other multi tools that maybe aren't hex related with them on them.
Having a lot of tools is cool but I want the common tools to be easy to use. There are plenty of options for smaller chain tools and such should I need one and I can find other multi tools that maybe aren't hex related with them on them.
#9
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,850
Bikes: Merlin Cyrene, Nashbar steel CX
Liked 1,611 Times
in
1,059 Posts
SKS Tom-7
Actually has more than I need as on the road, I've used only one of its tools and that was a couple years ago.
Actually has more than I need as on the road, I've used only one of its tools and that was a couple years ago.
#10
Senior Member
1 tire iron and a Lezyne Storage Drive
Likes For RGMN:
#11
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,700
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,537 Times
in
2,522 Posts
Thanks for the replies everyone,
This is the advice I need...from experienced riders. My mind isn't set on a multi tool and I'd actually prefer separate tools but was worried about space. Hopefully I won't need either. I like the small multi-tip screwdriver idea along with my flat tools/kit. I guess I need to figure out the sizes for torx tips and allen wrenches I need. If I need any more serious repairs, I'm calling for a ride.
This is the advice I need...from experienced riders. My mind isn't set on a multi tool and I'd actually prefer separate tools but was worried about space. Hopefully I won't need either. I like the small multi-tip screwdriver idea along with my flat tools/kit. I guess I need to figure out the sizes for torx tips and allen wrenches I need. If I need any more serious repairs, I'm calling for a ride.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#12
Senior Member
I don't experience a ton of mechanicals typically so honestly my multi tool doesn't get a ton of use, but I had a Crankbrothers M19 that did my solid for many years. Now I have a Park IB-3 and I like it pretty well. If I were touring or doing long gravel/endurance mtb rides where I more regularly needed a tool I'd probably look at different options.
Likes For cpach:
#13
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,515
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Liked 2,814 Times
in
1,808 Posts
Hero Kit multitool, the flattest, most compact I've found that includes a chain tool (which I've used a couple of times for friends on group rides) and fits the minimalist Lezyne Road Caddy seat bag on my lightest carbon fiber bikes.
Spin Doctor Rescue 16 multitool, same tools as the Hero Kit, perhaps slightly better made, but not nearly as flat and compact. It goes in the Serfas wedge bag on my steel bike.
Spin Doctor Rescue 16 multitool, same tools as the Hero Kit, perhaps slightly better made, but not nearly as flat and compact. It goes in the Serfas wedge bag on my steel bike.
Likes For canklecat:
#14
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,867
Bikes: RSO E-tire dropper fixie brifter
Liked 3,302 Times
in
2,096 Posts
The attraction to a MUT for me is the implied expectation that the tools will be self contained, easy to stow, be useful for 90% of roadside repairs, & not be a maraca while riding.
Unfortunately, there has been a lot of false hope for meeting those expectations & the solution is to acquire the tools YOUR bicycle may need À La Cart & derive a stowage solution to easily contain them. That has been what I've been doing for every bicycle I've ever owned, stemming from my experiences from my early-on adolescent time.
Unfortunately, there has been a lot of false hope for meeting those expectations & the solution is to acquire the tools YOUR bicycle may need À La Cart & derive a stowage solution to easily contain them. That has been what I've been doing for every bicycle I've ever owned, stemming from my experiences from my early-on adolescent time.
__________________
-YMMV
-YMMV
Likes For Troul:
#15
Senior Member
Anything without a chainbreaker, thousands of kilometers in multiple countries and never needed one. Just basic sccrewdrivers allen and torx, with longer ones being better than short. Also reasonably stiff folding, floppy tools suck.
Likes For Trevtassie:
#16
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Likes: 0
Liked 1,102 Times
in
747 Posts
I've never needed one for myself but I've used the one I carry to bail out other riders a few times. My Ritchey CT-5 chaintool is very small and weighs only 30 grams and uses the 5mm allen key on my Park MT-1 to turn the drive screw. It certainly wouldn't hold up to routine use but as an emergency tool it's been very useful.
Likes For HillRider:
#17
Junior Member
Join Date: Sep 2011
Location: San Juan, PR
Posts: 164
Bikes: 1980's Royce Union "fixed wheel", 1995 Trek 370, 406 -wheeled " shopper/minivelo"for running errands, SS Raleigh M60
Liked 68 Times
in
50 Posts
In the "serious" bike kit, I keep my first generation Crank Bros. M17 (and yes, I have used it and its chain tool throughout its life), in the fixed wheel's bike kit I keep separate tools (DIY combo tire levers with 14/15mm boxed spanners). As an EDC, it can be a Victorinox Swisstool Spirit, a Leatherman Rebar, PST II, or Wave; or a Gerber MP600.
Last edited by Juan el Boricua; 06-13-21 at 09:19 AM.
Likes For Juan el Boricua:
#18
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,326
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Liked 1,101 Times
in
729 Posts
You've probably read this before (and you probably don't want to hear it if your mind is set on a multi-tool), but I have found that carrying the few individual tools I need works out much better than lugging around a heavy multi-tool with a bunch of components that don't work well and/or aren't needed for my bike. The chain tool component of most multi-tools is usually not very good and nor are the tire levers. For me, having all those Allen wrenches attached to a fat handle makes them really hard to maneuver in tight spaces on the bike.
I carry a small chain tool, small Phillips and flat screwdrivers, a tire lever, and just the (loose) Allen wrenches I need.
I carry a small chain tool, small Phillips and flat screwdrivers, a tire lever, and just the (loose) Allen wrenches I need.
#19
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Liked 645 Times
in
366 Posts
In the past several years the tool that I've wished I had with me was a needle nose pliers. I've encountered a few punctures that were caused by radial ply tire wires. Those little devils hiding in your tire can be hard to find and, even once found, can be the devil to root out.
In kind of a reverse Murphy's Law thing, I haven't had a radial wire puncture since I started carrying a tiny needle nose.
In kind of a reverse Murphy's Law thing, I haven't had a radial wire puncture since I started carrying a tiny needle nose.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#20
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,850
Bikes: Merlin Cyrene, Nashbar steel CX
Liked 1,611 Times
in
1,059 Posts
I can't imagine needing to have to install bottle cages on my ride; if I did, I suppose the bike shop where I picked one up would lend me one or actually maybe install it for me. Multi-tool works fine for how I'd imagine (and just imagine mind you; haven't had a need) requirements to futz with usual 98% suspects such as seatpost collar, saddle, limiter screws, stem bolts, brake caliper bolts.
#21
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,700
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,537 Times
in
2,522 Posts
In the past several years the tool that I've wished I had with me was a needle nose pliers. I've encountered a few punctures that were caused by radial ply tire wires. Those little devils hiding in your tire can be hard to find and, even once found, can be the devil to root out.
In kind of a reverse Murphy's Law thing, I haven't had a radial wire puncture since I started carrying a tiny needle nose.
In kind of a reverse Murphy's Law thing, I haven't had a radial wire puncture since I started carrying a tiny needle nose.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#22
Senior Member
PB Swiss 470 Bike Tool. Goes with me on every ride.
I have a number of fine mutli-tools (some expensive); however, the only one, the only one that can function as good as a regular tool is the PB Swiss Bike Tool (made in Switzerland). The handle's side is also a full-functioning tire lever. Not cheap but the best I have found and I have Park, Lezyne, Pedro, Crankbrothers, etc.
Amazon has them sometimes. Their US distributor has them too: https://www.shop.pbtools.us/
This is the PB Swiss. Come in a rainbow of different colors too:
--
I have a number of fine mutli-tools (some expensive); however, the only one, the only one that can function as good as a regular tool is the PB Swiss Bike Tool (made in Switzerland). The handle's side is also a full-functioning tire lever. Not cheap but the best I have found and I have Park, Lezyne, Pedro, Crankbrothers, etc.
Amazon has them sometimes. Their US distributor has them too: https://www.shop.pbtools.us/
This is the PB Swiss. Come in a rainbow of different colors too:
--
Last edited by drlogik; 06-13-21 at 10:27 AM.
Likes For drlogik:
#23
Senior Member
Here is a photo of my kit. Every part is my ideal tool in terms of usability. The Schwalbe tire levers are slim but strong. The Wera bit ratchet is rated for 40N-m, so it is strong enough for any fastener I will put it on, including the 8mm bit for pedals. The chain tool is an add-on for a fixit sticks kit which uses the bit extension as a stabilizer and the but ratchet as a handle. The red thing is a valve cap that doubles as a valve core remover. Kit includes a spare valve core, quick link, and valve extender.
the bits are 2.5mm through 8mm, t25, t27, JIS bit, small flat head, and a 1/4” square drive. The main part of the kit is exactly 250g, and the bottom row adds another 150g.
The bottom row is added to my kit for rides where I am out in the sticks and need to be more self-sufficient, but comes along most of the time anyway if I am not concerned about weight. The Knipex have removed radial wire that would have been impossible to remove with fingers. It will also remove 15mm axle nuts and pedals. It would also remove a stubborn presta nut or hold a valve body to remove a valve core that has been cemented on with dried sealant.
the bits are 2.5mm through 8mm, t25, t27, JIS bit, small flat head, and a 1/4” square drive. The main part of the kit is exactly 250g, and the bottom row adds another 150g.
The bottom row is added to my kit for rides where I am out in the sticks and need to be more self-sufficient, but comes along most of the time anyway if I am not concerned about weight. The Knipex have removed radial wire that would have been impossible to remove with fingers. It will also remove 15mm axle nuts and pedals. It would also remove a stubborn presta nut or hold a valve body to remove a valve core that has been cemented on with dried sealant.
Last edited by aggiegrads; 06-13-21 at 10:07 PM.
Likes For Pop N Wood: