Bicycle Storage
#1
Fat Guy on a Little Bike
Thread Starter
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Liked 355 Times
in
178 Posts
Bicycle Storage
This might not be the right forum for this question, but I don't know where else to ask. How do you store your bikes so as to maximize space and minimize wife/girl friend annoyance?
My future Mrs. Snake heard about a system of hooks on railings, sort of like a clothes hanger, and I don't know where to look for what she's talking about.
My future Mrs. Snake heard about a system of hooks on railings, sort of like a clothes hanger, and I don't know where to look for what she's talking about.
#2
Banned.
It's always a problem in my garage. Right now, mine are on wall mounts or gravity racks.
Our agreement was "none" on the floor, so I only have 3 there.
I'm big on space in the garage, so eventually, they will all be on lifts to the ceiling. Wal-Mart and Lowe's sell a lift kit that's a lot cheaper than the bike box stores, so I'll probably get them there and mount them the most efficient way, which will have the bikes side by side, facing alternating directions.
Whenever you store bikes close together, they find a way to hit each other, and storage damage is always an issue. I simply won't consider storage damage for a couple of bikes, so they get their own wall/wheel hook in another area of the garage.
I've seen ingenious uses of PVC pipe and shelving brackets to make a long rod that stores bikes in a row, rows of hooks on a wall, ceiling lifts, and one of those multiple bike lifts that stores 4-5 together and uses a garage door opener to raise and lower. There's an infinte variety of ways, because we all have multiple reasons we can/cannot store bikes.
Once I get done with my ceiling lifts, I'll probably sell my 14' floor-ceiling rack (3 bikes), my gravity rack (2 bikes), and a 1-bike wall mount to offset the costs. There are always guys like me who need to "do something about those bikes, dear!"
Our agreement was "none" on the floor, so I only have 3 there.
I'm big on space in the garage, so eventually, they will all be on lifts to the ceiling. Wal-Mart and Lowe's sell a lift kit that's a lot cheaper than the bike box stores, so I'll probably get them there and mount them the most efficient way, which will have the bikes side by side, facing alternating directions.
Whenever you store bikes close together, they find a way to hit each other, and storage damage is always an issue. I simply won't consider storage damage for a couple of bikes, so they get their own wall/wheel hook in another area of the garage.
I've seen ingenious uses of PVC pipe and shelving brackets to make a long rod that stores bikes in a row, rows of hooks on a wall, ceiling lifts, and one of those multiple bike lifts that stores 4-5 together and uses a garage door opener to raise and lower. There's an infinte variety of ways, because we all have multiple reasons we can/cannot store bikes.
Once I get done with my ceiling lifts, I'll probably sell my 14' floor-ceiling rack (3 bikes), my gravity rack (2 bikes), and a 1-bike wall mount to offset the costs. There are always guys like me who need to "do something about those bikes, dear!"
#4
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,132
Bikes: Too many to list here check my signature.
Liked 3,272 Times
in
1,651 Posts
I like these two teir racks. they take up alot of wall space but considering they make great living art I don't really mind looking at them.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#5
Fat Guy on a Little Bike
Thread Starter
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Liked 355 Times
in
178 Posts
For now...we have 8 that are "house" bikes and 4 more that are for sale. That number isn't firm and is likely to grow. I have about 10 x 10 of basement space as my bike room, but it has a low ceiling.
#6
Senior Member
Happy Mother's Day.
I am already in the doghouse before 8 am this morning. I got up early to clean bikes, and I violated Mrs. Gomango's rule #102 that states there shall be no road bikes, or parts of road bikes, in her living room.
Guilty as charged. I brought up the portable stand from the basement early this morning and was gleefully finishing up a cleaning of my De Rosa SLX when I heard her stir. There was no use in thinking up excuses, as there are bikes everywhere. Not to mention the tell-tale odor of Simple Green.
As for storing these, I have some nice racks that I made a year ago that kept everything off the floor. I saw a pic in the forums here, and I wish I could remember the thread, but it really allows the tight packing of bikes in a hanging by the front wheel system. You can really pack 'em in if you loosen the handlebar stem and twist it sideways.
The problem right now is we are remodeling our basement and that was my former hideaway for red racing bikes.
I think I am going to band together with a few of my riding cronies and rent a deserted storefront. We found one on the outskirts of DT St. Paul that is right off the Shepherd Road bike path. Second floor has a view of the mighty Mississippi. This would make a dandy off site solution and would be a perfect spot to collect our overflow. Not to mention a great spot for our CL sales efforts. I have two buddies that are selling car parts and this would be a good solution for them as well. All we need is a security system for this site and we are good to go. The owner of the site is in a bike club with her husband so maybe we'll catch a break on rent.
Yep, a bike clubhouse. That's the ticket! I think I'll put this idea in the Mother's Day card that I am going to purchase in two or three minutes!
I am already in the doghouse before 8 am this morning. I got up early to clean bikes, and I violated Mrs. Gomango's rule #102 that states there shall be no road bikes, or parts of road bikes, in her living room.
Guilty as charged. I brought up the portable stand from the basement early this morning and was gleefully finishing up a cleaning of my De Rosa SLX when I heard her stir. There was no use in thinking up excuses, as there are bikes everywhere. Not to mention the tell-tale odor of Simple Green.
As for storing these, I have some nice racks that I made a year ago that kept everything off the floor. I saw a pic in the forums here, and I wish I could remember the thread, but it really allows the tight packing of bikes in a hanging by the front wheel system. You can really pack 'em in if you loosen the handlebar stem and twist it sideways.
The problem right now is we are remodeling our basement and that was my former hideaway for red racing bikes.
I think I am going to band together with a few of my riding cronies and rent a deserted storefront. We found one on the outskirts of DT St. Paul that is right off the Shepherd Road bike path. Second floor has a view of the mighty Mississippi. This would make a dandy off site solution and would be a perfect spot to collect our overflow. Not to mention a great spot for our CL sales efforts. I have two buddies that are selling car parts and this would be a good solution for them as well. All we need is a security system for this site and we are good to go. The owner of the site is in a bike club with her husband so maybe we'll catch a break on rent.
Yep, a bike clubhouse. That's the ticket! I think I'll put this idea in the Mother's Day card that I am going to purchase in two or three minutes!
Likes For gomango:
#7
Senior Member
Join Date: Jun 2008
Location: Atlanta
Posts: 2,978
Bikes: Cannondale T700s and a few others
Likes: 0
Liked 3 Times
in
3 Posts
I have a simular rack as Bianchigirll for my Daily drivers that live in the foyer. They keep the bikes reasonably tight to the wall Only thing of warning is you need to get a short bunge to keep the front wheel straight and off the wall.
The one I have is sold as "Bikes Aloft at Performance. There is a set of optional short hangers that alow you to expand that style rack to hold 4 bikes but you would have to be a good ways off the wall to allow access to all the bikes.
I'm tossing around the idea of ripping some of the sheet rock off the ceiling of my garage to allow access to the roof joists so that I can slip the bikes up between the ceiling joists to get some head room. My buddy stores his bikes that way in his detached 3 bay shop and has about 6.5 feet of clearance to walk under them.
www.rei.com and /www.performancebike.com show quite a few storage options on their sites.
With your low ceilings in your store room might want to look a a row of these on one wall. You could alternate the height so the handle bars do not tangle and get quite a few bikes on one wall.
https://www.performancebike.com/bikes..._400007_400245
The one I have is sold as "Bikes Aloft at Performance. There is a set of optional short hangers that alow you to expand that style rack to hold 4 bikes but you would have to be a good ways off the wall to allow access to all the bikes.
I'm tossing around the idea of ripping some of the sheet rock off the ceiling of my garage to allow access to the roof joists so that I can slip the bikes up between the ceiling joists to get some head room. My buddy stores his bikes that way in his detached 3 bay shop and has about 6.5 feet of clearance to walk under them.
www.rei.com and /www.performancebike.com show quite a few storage options on their sites.
With your low ceilings in your store room might want to look a a row of these on one wall. You could alternate the height so the handle bars do not tangle and get quite a few bikes on one wall.
https://www.performancebike.com/bikes..._400007_400245
Last edited by Grim; 05-09-10 at 07:22 AM.
#8
Senior Member
I have packed the garage to the gills, and as they spilled over into my basement (below) I created a mini version of the racks I've used in my garage.
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
__________________
- Auchen
- Auchen
#9
Senior Member
I have packed the garage to the gills, and as they spilled over into my basement (below) I created a mini version of the racks I've used in my garage.
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
Eureka. This is it!
#11
Senior Member
Join Date: May 2008
Location: Southwest Michigan
Posts: 1,554
Bikes: Fuji Monterey, Schwinn Traveler, Fuji Special Road Racer, Gitane Interclub, Sun EZ-1, Schwinn Frontier, Puch Cavalier, Vista Cavalier, Armstrong, Raleigh Sports, Schwinn Stingray
Likes: 0
Liked 2 Times
in
2 Posts
+1
This is very nice, I can't believe I haven't thought of this. My bikes are just parked side-by-side in the barn however they go in. The regular riders are parked with their front wheel under a workbench that I don't use much. I have a taller workbench that I built for my height. I often have problems with pedals getting caught in spokes, or several bikes tipping over together, not tipping all the way but leaning enough to tangle up so that removal is a pain. I have a bunch of scrap lunber, so a bike rack it is.
This is very nice, I can't believe I haven't thought of this. My bikes are just parked side-by-side in the barn however they go in. The regular riders are parked with their front wheel under a workbench that I don't use much. I have a taller workbench that I built for my height. I often have problems with pedals getting caught in spokes, or several bikes tipping over together, not tipping all the way but leaning enough to tangle up so that removal is a pain. I have a bunch of scrap lunber, so a bike rack it is.
#12
Senior Member
Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 378
Bikes: Trek 600 Series, Miyata 610, Palo Alto Touring, Schwinn Paramountain
Likes: 0
Liked 0 Times
in
0 Posts
I think it's best if they don't see it... so 1.) dedicated bike shack if you have space in the yard 2.) outside storage rental
#13
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 13,019
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Liked 2,341 Times
in
1,036 Posts
Even with a low ceiling, try hanging the bikes from one hook and one wheel. If you carefully space the hooks and hang the bikes in an up and down sequence, you should be able to almost store 8 bikes across a 10 foot span.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#14
Senior Member
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 4,466
Bikes: many
Likes: 0
Liked 16 Times
in
13 Posts
It's always a problem in my garage. Right now, mine are on wall mounts or gravity racks. Our agreement was "none" on the floor, so I only have 3 there.
I'm big on space in the garage, so eventually, they will all be on lifts to the ceiling. Wal-Mart and Lowe's sell a lift kit that's a lot cheaper than the bike box stores, so I'll probably get them there and mount them the most efficient way, which will have the bikes side by side, facing alternating directions.
Whenever you store bikes close together, they find a way to hit each other, and storage damage is always an issue. I simply won't consider storage damage for a couple of bikes, so they get their own wall/wheel hook in another area of the garage.
I've seen ingenious uses of PVC pipe and shelving brackets to make a long rod that stores bikes in a row, rows of hooks on a wall, ceiling lifts, and one of those multiple bike lifts that stores 4-5 together and uses a garage door opener to raise and lower. There's an infinte variety of ways, because we all have multiple reasons we can/cannot store bikes.
Once I get done with my ceiling lifts, I'll probably sell my 14' floor-ceiling rack (3 bikes), my gravity rack (2 bikes), and a 1-bike wall mount to offset the costs. There are always guys like me who need to "do something about those bikes, dear!"
I'm big on space in the garage, so eventually, they will all be on lifts to the ceiling. Wal-Mart and Lowe's sell a lift kit that's a lot cheaper than the bike box stores, so I'll probably get them there and mount them the most efficient way, which will have the bikes side by side, facing alternating directions.
Whenever you store bikes close together, they find a way to hit each other, and storage damage is always an issue. I simply won't consider storage damage for a couple of bikes, so they get their own wall/wheel hook in another area of the garage.
I've seen ingenious uses of PVC pipe and shelving brackets to make a long rod that stores bikes in a row, rows of hooks on a wall, ceiling lifts, and one of those multiple bike lifts that stores 4-5 together and uses a garage door opener to raise and lower. There's an infinte variety of ways, because we all have multiple reasons we can/cannot store bikes.
Once I get done with my ceiling lifts, I'll probably sell my 14' floor-ceiling rack (3 bikes), my gravity rack (2 bikes), and a 1-bike wall mount to offset the costs. There are always guys like me who need to "do something about those bikes, dear!"
#15
Senior Member
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 4,466
Bikes: many
Likes: 0
Liked 16 Times
in
13 Posts
I have packed the garage to the gills, and as they spilled over into my basement (below) I created a mini version of the racks I've used in my garage.
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
They are simple and ultra-cheap to construct, can be rearranged and positioned wherever there is a little floor space, and I suppose (if you stick with treated lumber) they could be stacked outside like cord wood as you trim down the bike population within your domicile. (Haven't had occasion to try that myself though. )
You'll need a drill-driver, a miter saw, and the following parts:
(2) 16" lengths of 2x4 lumber
(3) 19" lengths of 2x4 lumber
(4) deck railing slats, cut to 34" lengths
(20) deck screws
I position the slats at 3-1/2" on center, to capture the front/rear road wheels. (That also seems to be a viable spacing even for my MTB).
#16
Senior Member
Veloglide
There's a system made by Veloglide that has hooks that slide on crossbars, and the crossbars in turn slide on two fixed bars. You can see a demo of it on youtube here https://www.youtube.com/watch?v=YOVVjzbb8aQ.
I wanted that system but didn't want to spend the money on it, so I built something similar. It's a little embarrassing how long it took me to figure out just how to do it, but I've been using it for quite a while now and it's great.
I bolted two garage door rails to the rafters in my garage and bought a bunch of garage door rollers on ebay for cheap. I used conduit for the crossbars and put a roller in each end so they could roll forward and back on the rails. For the hooks, I bought aluminum straps, cut them into pieces, and bent them into hooks. Then I put some clear plastic tubing over the hooks and hung the bikes up. I can get 9 on there I think. Here's what it looks like...
I wanted that system but didn't want to spend the money on it, so I built something similar. It's a little embarrassing how long it took me to figure out just how to do it, but I've been using it for quite a while now and it's great.
I bolted two garage door rails to the rafters in my garage and bought a bunch of garage door rollers on ebay for cheap. I used conduit for the crossbars and put a roller in each end so they could roll forward and back on the rails. For the hooks, I bought aluminum straps, cut them into pieces, and bent them into hooks. Then I put some clear plastic tubing over the hooks and hung the bikes up. I can get 9 on there I think. Here's what it looks like...
Likes For brockd15:
#17
Senior Member
I would buy that system but i had no luck looking for it online, even at the website it listed. Lame!
There's a system made by Veloglide that has hooks that slide on crossbars, and the crossbars in turn slide on two fixed bars. You can see a demo of it on youtube here https://www.youtube.com/watch?v=YOVVjzbb8aQ.
I wanted that system but didn't want to spend the money on it, so I built something similar. It's a little embarrassing how long it took me to figure out just how to do it, but I've been using it for quite a while now and it's great.
I bolted two garage door rails to the rafters in my garage and bought a bunch of garage door rollers on ebay for cheap. I used conduit for the crossbars and put a roller in each end so they could roll forward and back on the rails. For the hooks, I bought aluminum straps, cut them into pieces, and bent them into hooks. Then I put some clear plastic tubing over the hooks and hung the bikes up. I can get 9 on there I think. Here's what it looks like...
I wanted that system but didn't want to spend the money on it, so I built something similar. It's a little embarrassing how long it took me to figure out just how to do it, but I've been using it for quite a while now and it's great.
I bolted two garage door rails to the rafters in my garage and bought a bunch of garage door rollers on ebay for cheap. I used conduit for the crossbars and put a roller in each end so they could roll forward and back on the rails. For the hooks, I bought aluminum straps, cut them into pieces, and bent them into hooks. Then I put some clear plastic tubing over the hooks and hung the bikes up. I can get 9 on there I think. Here's what it looks like...
#18
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,602
Bikes: https://www.theheadbadge.com
Liked 4,538 Times
in
2,143 Posts
Likes For KonAaron Snake:
#20
Senior Member
I was going to paint the back wall with some of that kids proof paint but the lady at Home Depot recommended a semi-gloss latex. Tires makes clean right up!!
Likes For miamijim:
#21
Fat Guy on a Little Bike
Thread Starter
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Liked 355 Times
in
178 Posts
That's EXACTLY what we're looking for! Thanks!
I bought this system at Sears. Gladiator GarageWorks. The row of bikes picture spans 1/2 of the bachwall of my garage. You cany slide them like they're on a clothesline or rollers but you can move the hooks closer together by hand to more tightly pack the bike that aren't geing ridden. As you can I have still have 1 slot left on the left. No worries though, I have 3 bikes upstairs and 2 in garage not pictured!!
I was going to paint the back wall with some of that kids proof paint but the lady at Home Depot recommended a semi-gloss latex. Tires makes clean right up!!
I was going to paint the back wall with some of that kids proof paint but the lady at Home Depot recommended a semi-gloss latex. Tires makes clean right up!!
#22
Malcontent
Join Date: May 2018
Location: Milwaukee
Posts: 133
Bikes: I honestly don't know...
Liked 98 Times
in
46 Posts
Hi, I am revitalizing an old thread here.
Most of my bikes are either road bikes, touring bikes or mountain bikes. I have approximately ten (10) as of 2023. I'm limited on space, and don't want my bikes either getting wet downstairs in the basement or getting dusty with dirt or cobwebs in the garage. Also, I'm limited on space in my house.
Besides the ideas listed previously on this thread, what ideas have you come up with for storing your bicycle collections? Thanks.
Most of my bikes are either road bikes, touring bikes or mountain bikes. I have approximately ten (10) as of 2023. I'm limited on space, and don't want my bikes either getting wet downstairs in the basement or getting dusty with dirt or cobwebs in the garage. Also, I'm limited on space in my house.
Besides the ideas listed previously on this thread, what ideas have you come up with for storing your bicycle collections? Thanks.
#23
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,132
Bikes: Gängl, Trek 938, Raleigh Professional, Paramount, Allez, Guerciotti, Specialized Stumpjumper, Trek 750, Miyata 1000 < Huffy
Liked 4,008 Times
in
1,618 Posts
Hi, I am revitalizing an old thread here.
Most of my bikes are either road bikes, touring bikes or mountain bikes. I have approximately ten (10) as of 2023. I'm limited on space, and don't want my bikes either getting wet downstairs in the basement or getting dusty with dirt or cobwebs in the garage. Also, I'm limited on space in my house.
Besides the ideas listed previously on this thread, what ideas have you come up with for storing your bicycle collections? Thanks.
Most of my bikes are either road bikes, touring bikes or mountain bikes. I have approximately ten (10) as of 2023. I'm limited on space, and don't want my bikes either getting wet downstairs in the basement or getting dusty with dirt or cobwebs in the garage. Also, I'm limited on space in my house.
Besides the ideas listed previously on this thread, what ideas have you come up with for storing your bicycle collections? Thanks.
I've tried pursuing the 'how about in the middle of the living room wall above the couch?' angle w/ the wife, but there have been drawbacks.
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#25
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,711
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Liked 2,327 Times
in
1,162 Posts
Wet in the basement generates a lot of questions! My favorite place for storage is ceiling mounts. This is problematic because of variable heights of ceilings.
Only one house in my past had one high enough to hang over the door. when it was open.
The spacing of joists is a challenge too. Figuring out spacing requirements is another challenging effort. For drop bars, about 10" works well when alternating direction. When you get to mountain bikes with wide bars, the requirements change forcing more of an alternating offset.
I mounted 8 sets of hanging pullies on a 3/4" plywood piece and mounted the plywood to the available joists to fit my needs.
Only one house in my past had one high enough to hang over the door. when it was open.
The spacing of joists is a challenge too. Figuring out spacing requirements is another challenging effort. For drop bars, about 10" works well when alternating direction. When you get to mountain bikes with wide bars, the requirements change forcing more of an alternating offset.
I mounted 8 sets of hanging pullies on a 3/4" plywood piece and mounted the plywood to the available joists to fit my needs.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 05-26-24 at 05:20 AM.