Wooden rims?
#26
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 19,395
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Liked 13,232 Times
in
6,797 Posts
Likes For genejockey:
#27
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,979
Bikes: Bikey McBike Face
Liked 6,639 Times
in
3,356 Posts
On the other hand, on a gravel bike, if you get stranded over night, you can always build a nice fire. Not so with carbon - unless you have a death wish.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
Likes For znomit:
#29
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,646
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,573 Times
in
4,427 Posts
#30
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 19,395
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Liked 13,232 Times
in
6,797 Posts
Likes For genejockey:
#31
Full Member
This presentation about wood rims reminds me of what the great Mark Rippetoe said about homemade wood power racks. Rippetoe is a strength training coach and the power rack is an excellent tool for performing barbell squats. In that regard he stated (paraphrasing): "the reason we don't use wood racks is the same reason we don't build cars with wood." I think that thought is applicable to the idea of wood rims.
Likes For ArgoMan:
#32
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,979
Bikes: Bikey McBike Face
Liked 6,639 Times
in
3,356 Posts
On the other hand, if you are crossing a raging river and get swept away with your bike, the air the tires and the wood rims would be a life saver (or light saber). <-thinking of Darth Vader above.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
#33
Senior Member
Join Date: Jul 2009
Posts: 6,505
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Liked 8,318 Times
in
3,304 Posts
I built a cart pre-loaded with 90km of concrete, for a total of 130kg, I mounted a classic steel+tugsten fork (the fork is/was 1.1kg, not among the lightest, it is among the cheapest, taken a super economical entry level bicycle), mounted a guinea pig wheel with a tire inflated to 7 bar, I blocked the descent of a road, I went to the top, I let the cart move with remote-controlled steering, and I made it crash with a final speed of about 40km/h a block of cement mortar.
You crashed aluminum wheels into a concrete block at 40 kph (25mph) while loaded with 130 kg (286 lbs.) of weight. From the (disastrous) results, you've concluded that it's "totally idiotic" to use Campy wheels for anything other than track riding, and you're looking into wooden wheels as an alternative.
Okaaaaaay ...
Likes For tomato coupe:
#35
Junior Member
Thread Starter
Just to summarize:
You crashed aluminum wheels into a concrete block at 40 kph (25mph) while loaded with 130 kg (286 lbs.) of weight. From the (disastrous) results, you've concluded that it's "totally idiotic" to use Campy wheels for anything other than track riding, and you're looking into wooden wheels as an alternative.
Okaaaaaay ..
You crashed aluminum wheels into a concrete block at 40 kph (25mph) while loaded with 130 kg (286 lbs.) of weight. From the (disastrous) results, you've concluded that it's "totally idiotic" to use Campy wheels for anything other than track riding, and you're looking into wooden wheels as an alternative.
Okaaaaaay ..
- Campagnolo's marketing, which pushes towards "fluid dynamics wheels" { Zonda, Shamal, Vento, Bora, ... }
- How things really are in terms of, not performance, because there is no doubt that fluid dynamics wheels create less turbulence, so they save a few Watts, but from the point of view of road safety.
Then I found myself faced with very strong marketing for wooden rims, thanks to the fact that they were used in various sporting events in the '20s, '30s and '40s. There are many photos and testimonials, and four companies in Italy that "make" wooden rims, on traditional 40s skills, just with modern processes.
Interesting, but must be verified. Even because modern marketing insists that, from a medical point of view, they place less stress on the wrist, elbow, shoulder and spinal joints.
- pure ********? or Is there any truth in all this?
- and how does a wooden rim really behave in the event of an impact?
- What wood are we talking about? Not all woods are the same
-
I was hoping someone here would tell me something about them after having tried them.
Meanwhile, found a bicycle made in 1936. Still in working state, even if equipped with wooden rims.
Last edited by DiTBho; 05-17-24 at 10:32 AM.
#36
Junior Member
Thread Starter
And by the way, there are also bicycle wooden frames..
And famous people who have purchased them and use them privately.
An example is Giovanotti. An Italian singer.
I know, he spent more than 8K euro on a custom bike built with a wooden frame.
I think he uses it for "tourism cycle" purposes, and that he also decorates his living room with it.
I would like to know more about wooden frames, for now my interest is only on rims, of any material
And famous people who have purchased them and use them privately.
An example is Giovanotti. An Italian singer.
I know, he spent more than 8K euro on a custom bike built with a wooden frame.
I think he uses it for "tourism cycle" purposes, and that he also decorates his living room with it.
I would like to know more about wooden frames, for now my interest is only on rims, of any material
- Aluminium, various alloys, some are "industrial secret", e.g. H+Son ...
- Steel (if I will ever find one... )
- Carbon
- Wood
#37
Senior Member
And by the way, there are also bicycle wooden frames..
And famous people who have purchased them and use them privately.
An example is Giovanotti. An Italian singer.
I would like to know more about wooden frames, for now my interest is only on rims, of any material
And famous people who have purchased them and use them privately.
An example is Giovanotti. An Italian singer.
I would like to know more about wooden frames, for now my interest is only on rims, of any material
- Aluminium, various alloys, some are "industrial secret", e.g. H+Son ...
- Steel (if I will ever find one... )
- Carbon
- Wood
That said, you can add magnesium to the list. There are a few passionate advocates here. Also, titanium.
And various combinations and permutations. Such as the Slingshot bikes, which used a Fiberglas hinge in the top tube near the seat tube and a tensioned steel cable in place of a down tube. Reviews in bike magazines said the Slingshot bike looked ridiculous but accelerated like a rocket.
Last edited by Trakhak; 05-17-24 at 10:39 AM.
#38
Senior Member
Join Date: Jul 2009
Posts: 6,505
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Liked 8,318 Times
in
3,304 Posts
This thread is really delivering ...
Likes For tomato coupe:
#39
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,744
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Liked 471 Times
in
336 Posts
I have seriously considered building up a set of Italian wood 700c rims for a disc brake build. Admittedly some of my reasoning is that it would be for the coolness factor if it could be done in a way that the wheels would hold together under disc brake forces. I would imagine traditional 36 hole drilling laced up 2 or 3 cross would give the best chance of holding together under a #195 pound person. I would talk to my go to LBS wheel builder to see what he thinks re standard butted DT Swiss or if the lighter gauge “Revolution” DT Swiss spoke would be all right thanks to the 36 spokes, I kind of think it would work and the wheel would be every day fair weather reliable, not necessarily just for a show bike…
I think it would be interesting to find out if anyone ran a wooden rim for tubeless, hookless implementation. I could see where such a wheel would be super plush riding if you could assure that it would run true. If the hookless, tubeless idea is not workable, then the tubular version I would think would work great as well. Since the wheel would be with disc hubs there would be no worries re: sidewall issues were it to be built for rim brake. As far as which woods might hold up the best, I guess you could inquire with the wooden rim maker in Italy (Ghisallo?) to get their opinion and to check availability. Ash or white oak would be choices I would think would be good or a sandwich of different woods all laminated up might be cool as well.
I think it would be interesting to find out if anyone ran a wooden rim for tubeless, hookless implementation. I could see where such a wheel would be super plush riding if you could assure that it would run true. If the hookless, tubeless idea is not workable, then the tubular version I would think would work great as well. Since the wheel would be with disc hubs there would be no worries re: sidewall issues were it to be built for rim brake. As far as which woods might hold up the best, I guess you could inquire with the wooden rim maker in Italy (Ghisallo?) to get their opinion and to check availability. Ash or white oak would be choices I would think would be good or a sandwich of different woods all laminated up might be cool as well.
#40
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,646
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,573 Times
in
4,427 Posts
Likes For datlas:
#41
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,547
Bikes: Scott Addict R1, Felt Z1
Liked 4,091 Times
in
2,016 Posts
Material : Specific Strength (kN-m/kg)
4130 stee. : 71-85
6061-T6 Al : 115
7075-T6 Al : 204
Pine wood : 223
Titanium alloy : 260
Balsa wood : 521
Carbon composite : 785
Likes For terrymorse:
#42
Junior Member
Thread Starter
If I had the time and the money, or if Campagnolo/Mavic/etc would pay me to do it many more experiments ...
(They certainly do them internally, just as Tesla does internal car crash tests and doesn't publish any data)
I do what I can only do, and I have drawn conclusions that I do not publish for this very reason: they have a major methodological flaw at their base.
It's for my personal use, and it's better than nothing. It just gives me the idea of a trend, which, in turn, gives me an idea about the type of wheels I really want to use.
What I have learned is to never underestimate anything, and always verify everything in person.
#43
Banned
Gonna need waders pretty soon.
Likes For shelbyfv:
#44
Senior Member
Join Date: Jul 2009
Posts: 6,505
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Liked 8,318 Times
in
3,304 Posts
#45
Senior Member
Surprisingly, wood's strength-to-weight ratio is not too shabby. If the goal is minimizing weight, it's not the dumbest choice.
Material : Specific Strength (kN-m/kg)
4130 stee. : 71-85
6061-T6 Al : 115
7075-T6 Al : 204
Pine wood : 223
Titanium alloy : 260
Balsa wood : 521
Carbon composite : 785
Material : Specific Strength (kN-m/kg)
4130 stee. : 71-85
6061-T6 Al : 115
7075-T6 Al : 204
Pine wood : 223
Titanium alloy : 260
Balsa wood : 521
Carbon composite : 785
#46
Junior Member
Thread Starter
I have seriously considered building up a set of Italian wood 700c rims for a disc brake build. Admittedly some of my reasoning is that it would be for the coolness factor if it could be done in a way that the wheels would hold together under disc brake forces. I would imagine traditional 36 hole drilling laced up 2 or 3 cross would give the best chance of holding together under a #195 pound person. I would talk to my go to LBS wheel builder to see what he thinks re standard butted DT Swiss or if the lighter gauge “Revolution” DT Swiss spoke would be all right thanks to the 36 spokes, I kind of think it would work and the wheel would be every day fair weather reliable, not necessarily just for a show bike…
I think it would be interesting to find out if anyone ran a wooden rim for tubeless, hookless implementation. I could see where such a wheel would be super plush riding if you could assure that it would run true. If the hookless, tubeless idea is not workable, then the tubular version I would think would work great as well. Since the wheel would be with disc hubs there would be no worries re: sidewall issues were it to be built for rim brake. As far as which woods might hold up the best, I guess you could inquire with the wooden rim maker in Italy (Ghisallo?) to get their opinion and to check availability. Ash or white oak would be choices I would think would be good or a sandwich of different woods all laminated up might be cool as well.
I think it would be interesting to find out if anyone ran a wooden rim for tubeless, hookless implementation. I could see where such a wheel would be super plush riding if you could assure that it would run true. If the hookless, tubeless idea is not workable, then the tubular version I would think would work great as well. Since the wheel would be with disc hubs there would be no worries re: sidewall issues were it to be built for rim brake. As far as which woods might hold up the best, I guess you could inquire with the wooden rim maker in Italy (Ghisallo?) to get their opinion and to check availability. Ash or white oak would be choices I would think would be good or a sandwich of different woods all laminated up might be cool as well.
They need a nipple kit, which is already included with the purchase: 160 euros for a pair of rims
CBita also has cork pads, to be mounted on Campagnolo Calipher rim-brakes ( I will install only the front brake, as usual ), and wooden pedals with aluminum cores (ball or sealed bearings), derived from the Japanese MKS pedals.
Likes For DiTBho:
#47
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,426
Bikes: Giant Defy, Giant Revolt
Liked 1,265 Times
in
718 Posts
And apparently beech wood is where the sweet spot between weight and strength meet for this application.
https://roadbikeaction.com/rolling-on-wheels-of-wood
__________________
It's like riding a bicycle
It's like riding a bicycle
Last edited by urbanknight; 05-17-24 at 11:13 AM.
#48
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,547
Bikes: Scott Addict R1, Felt Z1
Liked 4,091 Times
in
2,016 Posts
Pound for pound, pine is about 10% stronger than aluminum, and 160% stronger than 4130 steel.
Likes For terrymorse:
#49
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,336
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,339 Times
in
2,793 Posts
Says someone who knows little about high quality wood/epoxy design and construction. Light, strong and long lasting sailboat hulls, masts, etc. have been made out of wood and raced for speed records and around the world. The skilled makers of wood sailboat spars would have little trouble making strong, light wood rims. Little excess resin and that would get squeezed out in the laminating process.
#50
Senior Member
In WWII they made perfectly good pt boats and mosquito bombers out of wood as well.