A gift I have no use for.
#1
re:member
Thread Starter
Join Date: Jan 2005
Location: Cracow, Poland
Posts: 874
Bikes: unknown make TT bike, fixed; Romet Sport, gone; titanium Pinarello gone;Colnago with Campy C-Record/Super Record,on it's way; Funny Gianni Motta; Buehler track, Polrad track chrome; titanium MTB on 28'', fixed; Tri Wheeler, fixed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A gift I have no use for.
I got for free a nicely machined 13T 3/32'' screw-on cog (it's nice to be in the area where fixed riding is not that popular). It has 8-BC34.6 and NL at the opposite side stamped near the base. However, it doesn't fit my Mack hubs, on which my Miche adapters spin freely on.
It has no place in this table:
Type Thread Equivalent
I.S.O. 1.375" x 24 tpi 34.92 x 1.048 mm
British 1.370" x 24 tpi 34.80 x 1.058 mm
French 34.7 x 1 mm 1.366" x 25.4 tpi
Italian 35 mm x 24 tpi 1.378" x 1.058 mm
I guess the number stamped is the thread diameter - indeed its a tad smaller than Campy - anybody knows the hub I need to buy to make it fit
It has no place in this table:
Type Thread Equivalent
I.S.O. 1.375" x 24 tpi 34.92 x 1.048 mm
British 1.370" x 24 tpi 34.80 x 1.058 mm
French 34.7 x 1 mm 1.366" x 25.4 tpi
Italian 35 mm x 24 tpi 1.378" x 1.058 mm
I guess the number stamped is the thread diameter - indeed its a tad smaller than Campy - anybody knows the hub I need to buy to make it fit
#2
re:member
Thread Starter
Join Date: Jan 2005
Location: Cracow, Poland
Posts: 874
Bikes: unknown make TT bike, fixed; Romet Sport, gone; titanium Pinarello gone;Colnago with Campy C-Record/Super Record,on it's way; Funny Gianni Motta; Buehler track, Polrad track chrome; titanium MTB on 28'', fixed; Tri Wheeler, fixed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ignore.
This is Uniglide casette cog/lockring. I was mislead by the straight, non twisted teeth.
This is Uniglide casette cog/lockring. I was mislead by the straight, non twisted teeth.